Description
-
Industry leading 3 YEAR WARRANTY (a $499 value!)
-
Single Point Safety Lock Release System
-
Supports Symmetrical Installation with Columns Facing Each Other or Asymmetrical Installation with Columns Rotated 30 Degrees!
-
104″ Drive Through Width with Symmetrical Installation and 97″ Drive Through Width with Asymmetrical Installation
-
Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!
-
CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity
-
One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters
-
All Robot Welded Structure with Durable Powder Coated Finish
APlusLift HW-10ASY car lift (auto hoist) is one of the most affordable overhead symmetrical and asymmetrical car lifts built with quality materials and good workmanship. It is an upgrade from the bestselling HW-10KOH-A model with an addition of single point lock release and an update from the AP-10SR model with an option to install the columns in a true asymmetrical way. That is, the columns can be installed facing each other (symmetrical installation) or with a 30-degree rotation to maximize door opening and vehicle access (asymmetrical installation). The lift has a strong double “S” column design to support 10,000 LB capacity.
We are proud to offer an industry leading 3 year warranty for all parts (a $499 value)! We have all replacement and optional parts available for our lifts. We welcome suggestions to improve our products and service!
Free shipping to lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require on-site forklift (no liftgate). We strongly recommend against renting a forklift; expense not reimbursed. See shipping policy below for limited access/remote/high-cost areas.
Warehouse Pickup Locations (Contact Us for $200 Discount): Charlotte (NC), Chicago (IL), Dallas (TX), Jacksonville (FL), Kansas City (MO), Las Vegas (NV), Mobile (AL), Portland (OR), Tacoma (WA), Virginia Beach (VA), and Watsontown (PA).
Frequently Asked Product, Order, and Shipping Questions and Technical Questions
Specifications |
|||||||||
| Model | HW-10ASY (This Model) |
HW-10KOH-A (for Comparison) |
|||||||
| Manual | HW-10ASY Manual Lock Assembly |
HW-10KOH-A Manual | |||||||
| Style | Overhead | Overhead | |||||||
| Column Installation | Symmetric or Asymmetric | Symmetric | |||||||
| Arm Arrangement | Symmetric or Asymmetric (combo) | Symmetric or Asymmetric (combo) | |||||||
| Lock Release | Single Point Release | Double Point Release | |||||||
| Warranty | 3 Years (36 months) | 3 Years (36 months) | |||||||
| Lifting Capacity | 10,000 LB | 10,000 LB | |||||||
| Overall Height | 141 3/16″ | 143 3/16″ | |||||||
| Overall Width | 139 1/8″ (standard) 140 15/32″ (post rotated) |
134 5/16″ | |||||||
| Maximum Lift height with Truck Adapters | 81″ | 81″ | |||||||
| Maximum Lift height without Truck Adapters | 75″ | 75″ | |||||||
| Maximum lift height from bottom of the arm to the ground | 71″ | 71″ | |||||||
| Minimum Height of Adjustable Pads from Ground | 4″ | 4″ | |||||||
| Drive Through Width (Carriage to Carriage) | 104″ (symmetric) 97″ (asymmetric) |
100″ | |||||||
| Column to Column Width | 113″ (symmetric) 107″ (asymmetric) |
109″ | |||||||
| Column Cross Section | 11″L x 7″W | 11″L x 7″W | |||||||
| Driving Mode | Dual hydraulic cylinders, chain drive | Dual hydraulic cylinders, chain drive | |||||||
| Motor | 220V Single Phase 3HP 10A (recommend a 30A breaker) | 220V Single Phase 3HP 10A (recommend a 30A breaker) | |||||||
| Hydraulic Oil | 3-5 gallons AW32/AW46 (not included) | 3-5 gallons AW32/AW46 (not included) | |||||||
| Time to full rise | 50 seconds | 50 seconds | |||||||
| Shipping Weight | 1470 LB and 120 LB | 1470 LB | |||||||
| Shipping package size |
|
113″L x 22″W x 40″ H | |||||||
| Concrete Requirement | 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below) | ||||||||
| Parts Included |
|
||||||||
| Optional Parts | 2 3/4″ and 6″ Tall Truck Adapters | ||||||||
| Arm Assembly | Combo (symmetrical and asymmetrical) Arm Assembly | ||||||||
| Front Arms | Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″ | ||||||||
| Back Arms | Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″ | ||||||||
| Column Steel Thickness | 13/64″ | ||||||||
| Carriage Steel Thickness | 15/64″ | ||||||||
| Carriage Yoke Thickness | 9/16″ | ||||||||
| Arm Steel Thickness | 15/64″ | ||||||||
| Base Plate Steel Thickness | 5/8″ | ||||||||
| Model | HW-10ASY (This Model) |
HW-10KOH-A (for Comparison) |
|||||||
Features
- CE-certified lift structure and hydraulic system
- Third-party tested with a dynamic load capacity of 115%
- Third-party tested with a static load capacity of 150%
- Durable hydraulic system
- Easy to operate and maintain
- Single-point safety lock release
- Double seal rings protecting PU material
- Carriage material Q355 (ASTM A572), stronger than normal Q235 steel
- Lifting operation by pressing the “UP” button on the motor
- Manual lowering operation by pressing the lever
- Relief valve built-in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built-in power pump to prevent overloading
- Door guard protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down
